Pressure independent control valves
Test Method for PICVs and DPCVs (BTS 1/2019), published by BSRIA in November 2019, defines a pressure independent control valve (PICV) as: ‘A valve that operates to maintain a controlled flow rate that is, within limits, independent of the supplied differential pressure. The valve may operate mechanically or electronically.’
The Illustrated Guide to Mechanical Building Services, Third Edition (BG 31/2017), by David Bleicher, published by BSRIA in 2017, suggests that pressure independent control valves (PICVs) are: ‘…used in variable flow heating or cooling systems to control the output of devices such as air handling units, fan coil units or chilled beams. They regulate flow constantly during varying pressure conditions and can be placed on either the flow or the return pipe.’
Test Method for Heat Interface Units (BTS 2/2015), written by Colin Judd, and published by BSRIA in December 2015 and amended in June 2016, states: ‘A pressure independent control valve (PICV) operates to maintain a controlled flow rate that is, within limits, independent of the supplied differential pressure. A PICV combines the functions of a DPCV, regulating valve and control valve.’
Energy Efficient Pumping Systems, a design guide (BG 12/2011), written by Chris Parsloe and published by BSRIA in 2011, states: ‘Sometimes referred to as a combination valve, a PICV combines the functions of a double regulating valve, differential pressure control valve and two-port control valve within a single valve body. Because the integral differential pressure control valve holds the pressure differential constant across the integral two-port control valve, the flow rate through the valve always returns to its set value whenever the control valve is fully open (since a constant pressure differential across a fixed resistance results in a constant flow rate). The opening through the two-port control valve can be varied manually, and can therefore be used to regulate the flow rate through the valve to the required design value. The flow rate can be set using an integral mechanism within the valve. Once set, the valve will perform the function of a constant flow regulator whenever the two-port control valve is fully open. Only when the control valve begins to close will the flow rate change from its set value.’
Selection of Control Valves in Variable Flow Systems (BG 51/2014) written by Chris Parsloe and published by BSRIA in June 2014, defines a pressure independent control valve (PICV) as: ‘A combination of an actuated two port control valve that varies the flow through a terminal device, and a differential pressure regulator that maintains a constant pressure differential across the control valve thereby ensuring that the set maximum design flow rate cannot be exceeded… Note 4: Although the majority of PICVs are of the type described above, the same objective of pressure independent control can be achieved by a combined two-port control valve and electronic flow measurement device. For products based on this approach, the control valve is fitted with an intelligent motorised actuator that enables the measured flow to be maintained at its required value regardless of pressure variations in the system. This type of valve is sometimes referred to as an “electronic PICV” and does not require an integral differential pressure controller.’
It suggests that typical applications include; modulating control of heating or cooling outputs from air handling units, fan coil units or chilled beams in variable flow systems. (Used without an actuator, PICVs hold flow rate constant at a fixed value regardless of changes in system pressures.)
For more information see: What makes a good PICV?
--BSRIA
[edit] Related articles on Designing Buildings
Featured articles and news
The benefits of engaging with insulation manufacturers
When considering ground floor constructions.
Lighting Industry endorses Blueprint for Electrification
The Lighting Industry Association fully supports the ECA Blueprint as a timely, urgent call to action.
BSRIA Sentinel Clerk of Works Training Case Study
Strengthening expertise to enhance service delivery with integrated cutting-edge industry knowledge.
Impact report from the Supply Chain Sustainability School
Free sustainability skills, training and support delivered to thousands of UK companies to help cut carbon.
The Building Safety Forum at the Installershow 2025
With speakers confirmed for 24 June as part of Building Safety Week.
The UK’s largest air pollution campaign.
Future Homes Standard, now includes solar, but what else?
Will the new standard, due to in the Autumn, go far enough in terms of performance ?
BSRIA Briefing: Cleaner Air, Better tomorrow
A look back at issues relating to inside and outside air quality, discussed during the BSRIA briefing in 2023.
Restoring Abbotsford's hothouse
Bringing the writer Walter Scott's garden to life.
Reflections on the spending review with CIAT.
Retired firefighter cycles world to raise Grenfell funds
Leaving on 14 June 2025 Stephen will raise money for youth and schools through the Grenfell Foundation.
Key points for construction at a glance with industry reactions.
Functionality, visibility and sustainability
The simpler approach to specification.
Architects, architecture, buildings, and inspiration in film
The close ties between makers and the movies, with our long list of suggested viewing.
SELECT three-point plan for action issued to MSPs
Call for Scottish regulation, green skills and recognition of electrotechnical industry as part of a manifesto for Scottish Parliamentary elections.
UCEM becomes the University of the Built Environment
Major milestone in its 106-year history, follows recent merger with London School of Architecture (LSE).
Professional practical experience for Architects in training
The long process to transform the nature of education and professional practical experience in the Architecture profession following recent reports.